240L plastic trash can What are the forms of display? Plastic garbage can manufacturer It is believed that there are two types, independent and classified. Look at the plastic below Garbage can manufacturer Give a detailed introduction.

Freestanding

Single use, high usage rate, common in public places and families.

Categorical formula

There are mainly three kinds, recyclable, non recyclable and toxic substances.

（1） Recyclable materials refer to wastes suitable for recycling and resource utilization.

It mainly includes:

Paper: writing paper, packaging paper and other paper products that are not seriously stained. Such as newspapers, all kinds of wrapping paper, office paper, advertising paper, etc.

Plastic: waste container plastic, packaging plastic and other plastic products. Such as plastic bags, plastic bottles, foamed plastics, disposable plastic lunch boxes and tableware, hard plastics, etc.

Metal: various types of scrap metal articles. Such as cans, tin cans, lead skin toothpaste, etc.

Glass: Colored and colorless waste glass products.

Fabric: used textile clothing and textile products.

（2） Non recyclable material refers to garbage other than recyclable garbage. Common garbage that can be easily decomposed under natural conditions, such as skins, vegetable leaves, leftovers, flowers, plants, branches and leaves.

（3） Toxic substances, such as waste batteries, waste fluorescent tubes, mercury thermometers, waste paint, expired drugs, etc.

I hope the above information introduced by the garbage can manufacturer can help you. The garbage can is also very common in our life. I hope you can also take the initiative to classify the garbage, and we will guard the beautiful home together.

Requirements for 240L plastic trash can:

1) High density polyethylene (HDPE) is used for one-time injection molding. The single cover weight shall be ≥ 1.2kg, the single can weight shall be ≥ 9.4kg, and the overall weight shall be 12.8kg (± 0.2kg).

2) The barrel body and lid are required to be 100% high-density polyethylene, and the pin is a long pin with a one-time injection molding length of no less than 500px made of copolymer PP material. It is high-strength, durable, simple to install, and has anti theft characteristics of barbs. It is directly connected with the three ears of the barrel lid to increase stability.

3) The barrel body and lid have strong airtightness and no deformation. High quality UV resistant materials account for 3% of the raw materials, and pigment pigments account for 5% to ensure that the color of the plastic barrel remains bright, durable and fadeless for 5 years.

4) The axle is a plug-in anti-theft structure. The axle is made of Q235 steel, and its surface is electro galvanized 12 μ Thickness, rust prevention time is 10 years; The tires are made of high-quality natural rubber as the outer wheel and excellent plastic as the inner wheel frame. The bearing capacity of each wheel is 120 ± 5kg. The iron parts inside the inner wheel frame are made of stainless steel.

5) The wall thickness of the trash can is ≥ 5mm, and the thickness of the outer edge of the top of the trash can is more than 6mm. At least 3 longitudinal stiffeners are set at each side of the outer edge of the top. 8 longitudinal stiffeners are set at the connection between the body of the trash can and the handle. The handle position has a anti-skid design.

6) The barrel body is connected with the barrel cover at three points, and the three outer ears of the barrel cover are closely connected with the handle of the barrel body through the long pin, so that the barrel body is closely connected with the barrel cover without falling off, preventing the barrel cover from swinging from left to right and falling off, and can be repeatedly opened and closed for more than a million times.

7) At least 3 stiffeners shall be provided at the end handle to effectively prevent deformation or damage of the handle.

8) Classification pattern printing shall be beautiful and tidy.

9) The product is acid resistant, alkali resistant and corrosion resistant. Normal operating temperature: - 30 ℃~+65 ℃;