Sanitation plastic trash can All of them are produced by large injection molding machines, and only different materials and models are classified according to different places of use. It is made of special material HDPE by one-time injection molding. It is mostly made of 100% high-density polyethylene or polypropylene, which is an environmental protection product that can be recycled. Due to the one-time injection molding process, the produced sanitation garbage can has no gap structure, making the garbage can more durable. At the same time, because of the characteristics of polypropylene material, the produced garbage can is smooth, which can effectively reduce the waste retention and facilitate cleaning.

Plastic dustbins are basically sprayed, because color difference is avoided and environmental protection service life is long. The first way to use plastic spraying is to remove the oil, dust, rust, etc. on the surface of the workpiece. If it is a special workpiece, it should be sprayed with a high-performance electrostatic spraying machine. Then, conduct high-temperature curing, push the sprayed workpiece into the curing furnace, heat it to the predetermined temperature, and hold the corresponding time; Open the furnace and take it out for cooling to get the finished product.

　　 Plastic garbage can manufacturer Introduce the specific performance of 240L/240L thickened plastic trash can

Material: High density polyethylene (HDPE)

Overall dimension: 1060X710X560mm

Barrel height: 1000mm

Color: red, green, yellow, blue, gray

to configure:

(Common) hollow shaft small rubber wheel (26.5 kg)

Hollow shaft large rubber wheel (28.5 kg)

Solid shaft large rubber wheel (30.5 kg)

(Thickened) hollow shaft small rubber wheel (28 kg)

Hollow shaft large rubber wheel (30kg)

Solid shaft large rubber wheel (33 kg)

Applicable to: special for environmental sanitation, township streets, property communities, industrial parks, sports venues, square parks, military schools, and major catering places.

Main features:

1. The wall is equipped with mesh stiffeners, which are solid and durable.

2. The area of the trailer at the front of the barrel body is increased by 20%, so that the force is evenly distributed when the trailer is used, and the service life is greatly prolonged.

3. The antiskid foot stepping device is wider than the garbage can in the past, which is more convenient to operate and easy to consign. The rubber wheel and the bottom shaft are connected by direct insertion, which is convenient for installation and effective against theft and unloading.