The application of sanitation trash can is very helpful to maintain the urban environment, Plastic garbage can manufacturer The design and production shall be carried out according to the classification characteristics of garbage cans. The size and accuracy of the mold shall be ensured, and its surface shall be smooth and tidy, and classification marks shall be printed; It is necessary to ensure that the garbage can has a tight structure, good sealing, and a fashionable and beautiful appearance, which can not only improve the practicality of the garbage can, but also ensure the attractiveness of the garbage can.

During the production of environmental sanitation garbage cans, the surface is required to be free of any defects such as pores, whitening, haze, black spots, poor gloss, and discoloration. Therefore, during the production process, the entire injection molding process has very strict requirements on raw materials, equipment, molds, and even the design of products.

In addition, in order to ensure the surface quality of the product during production, it is often necessary to make minor adjustments to the process parameters such as the high temperature of the machine, the injection pressure, and the injection speed, so that the mold can be filled during plastic injection, and the internal stress will not cause deformation and cracking of the product.

1. Sanitation trash cans are classified according to different uses and are molded by one-time injection molding. They can be well recycled for strong acids, alkalis and corrosive substances; The first draft of the garbage can shall be determined before the production of the environmental sanitation garbage can, because the garbage can is formed at one time, and the requirements for the size and accuracy of the mold are relatively high. Put the raw materials prepared for making the sanitation garbage can into the mold in turn, and take them out after the mold is formed under high temperature; After the forming and cooling of the environmental sanitation garbage can, the rough areas should be polished smooth, and different signs should be printed on the surface of the garbage can so that people can put garbage in categories.

2. The plastic structure of the environmental sanitation garbage can is tight, especially the mouth edge of the garbage can is thickened, so the garbage can will not be damaged by the impact from outside. In addition, the garbage can can be transported by the environmental sanitation vehicle, saving manpower.

3. To determine which kind of garbage is used for classified collection of environmental sanitation garbage cans, further changes can be made according to the characteristics of garbage. Recycling and non recyclable garbage cans, metal garbage recycling and corrosive materials recycling should be distinguished.

4. To determine the appearance of garbage cans, our common garbage cans are mainly three-dimensional rectangles. However, the appearance of sanitation garbage cans is also developing in the direction of fashion, attracting people to throw garbage through the appearance.

5. The garbage can is well sealed, which can cover the sour smell of deteriorated and moldy garbage and prevent rainwater from dripping into the garbage can to cause decay.