Plastic trash can is a common garbage sorting and storage tool in our daily life, so it is very important to keep it clean and maintained. Proper maintenance and cleaning of plastic trash can can extend its service life, improve the garbage classification and storage effect, and keep the environment clean. The following are Plastic garbage can manufacturer Some suggestions on how to properly maintain and clean plastic trash cans.

1. It is recommended to clean plastic trash cans every day. After using the trash can every day, dump the garbage inside, wash the inside and outside of the trash can with clean water, and clean it with proper detergent. After cleaning, dry the can body with a clean cloth and ensure that the inside and outside are dry. This can avoid bacteria breeding in the garbage can and prevent odor generation.

2. Sterilize plastic trash cans regularly. Not only the garbage can should be cleaned, but also the disinfection should be carried out frequently. Disinfection can kill the bacteria and viruses left in the barrel to prevent the spread of infectious diseases. Disinfection method can use diluted bleach, mix the bleach and water in a ratio of 1:10, spray the solution inside and outside the garbage can, leave it for a few minutes, and then rinse it with clean water. When disinfecting, pay attention to protecting skin and eyes, and avoid direct contact with bleach.

3. Different color plastic trash cans are used for garbage classification. Now there are plastic trash cans of various colors, shapes and sizes on the market, which can be selected according to needs. Garbage classification shall be carried out according to different types of garbage, such as recyclables, kitchen waste, hazardous waste, etc. The use of garbage cans with different colors can clearly distinguish different kinds of garbage, which is convenient for garbage classification and treatment in daily life.

4. Avoid pouring liquid waste directly into plastic trash cans. Plastic trash cans usually do not have the function of handling a large amount of liquid. If a large amount of liquid is directly poured into the trash can, it may cause leakage, dripping, odor and bacteria breeding. It is recommended to pour the liquid into a suitable container before putting the container into a plastic trash can to avoid damage to the trash can when disposing of liquid garbage.

5. Protect plastic trash cans from sun and rain. Long term exposure to strong sunlight will cause the plastic trash can to become brittle and easy to crack and damage. However, long-term rain soaking may cause the interior of the garbage can to be wet, increasing the risk of bacteria breeding. Therefore, it is recommended to place the plastic trash can in a cool and dry place, or use sunshade and rainproof measures to protect it.

6. Timely repair or replace damaged plastic trash cans. If the plastic trash can is damaged, if there are cracks, deformation or missing parts, repair or replace them as soon as possible. The damaged garbage can will not only affect the garbage classification and storage effect, but also may cause garbage leakage, odor diffusion, bacteria breeding and other problems. Therefore, it is necessary to pay attention to the status of garbage cans in time and take corresponding repair and replacement measures.

Proper maintenance and cleaning of plastic trash can can improve its service life and garbage disposal effect, and also help to keep the environment clean and healthy. Clean and regularly disinfect garbage cans every day, correctly classify and dispose garbage, prevent liquid garbage from directly pouring into garbage cans, protect garbage cans from sunlight and rain, and timely repair or replace damaged garbage cans. These are important steps to keep plastic garbage cans clean and maintained. I hope these suggestions are helpful to you.